Analyscentrum performs physical-chemical studies according to the OECD Principles of Good Laboratory Practice, GLP. We are, together with about 10 laboratories within the pharma sector, regularly inspected by Swedish authorities. We have been inspected by SWEDAC since 1991.
We also perform some GMP (Good Manufacturing Practice) work for external customers.
Analyscentrum is approved by SWEDAC for ten different methods (see table below) for the measurement of formaldehyde emission from building materials and for the measurement using FLEC (Field and Laboratory Emission Cell) equipment of volatile organic compound (VOC) emissions from various surfaces.
|
Accredited
Methods
|
|
| Formaldehyde Emission | |
| Chamber method 0.225 m3 | EN 717-1 |
| Desiccator (acrylate) 40 l | JAS MAFF 235 |
| Desiccator (glass) 10 l | JIS A 1460 |
| Flask method 0.5 l | EN 717-3 |
| Gas analysis,
4 l |
EN 717-2 |
| VOC and Aldehyde | |
| Emission cell FLEC | ISO 16000-10 |
| Japanese chamber, 20 l | JIS A 1901, ISO 16000-9 |
| Formaldehyde in Air | |
| Active sampling | ISO 16000–3 |
| Passive sampling | ISO 16000–4 |
| Formaldehyde in Water | |
| Acetylacetone method, HPLC | - |
All results and primary data are treated confidentially. On request we can also sign non-disclosure agreements.
To ensure high and uniform quality, all jobs at Analyscentrum are always done by two people in close cooperation - an analyst and a senior analyst. The laboratory work is done by the analyst, but at each important gateway such as choosing methods or evaluating results, the analyst is supported by the senior analyst and needs his or her approval to continue. Finally the senior analyst checks the primary data and approves the report.
If you have any questions regarding our quality system please contact Quality Manager Lennart Bodén (+46 8 743 45 93) or Laboratory Manager Maria Risholm-Sundman (+46 8 743 45 96)
